Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie


Bewerken van stap 3 —

Stap type:

Sleep om te herschikken

Remove the panel screw labeled with a #1 Phillips head screwdriver as indicated in the picture, then use a flat edge tool to pry the cover off.

The hardware to the left (labeled) can be easily removed by disconnecting the black and white wires and pushing the tabs that secure it (located on the side) outwards.

Pull the Wi-Fi card out from the device at a slight angle (horizontal with the casing).

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.