Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie


Bewerken van stap 17 —

Stap type:

Sleep om te herschikken

LEDs are polarized: one side of the diode is positive, the other is negative. It is typical convention for an LED to be manufactured with its positive lead longer than the negative lead.

Positive lead (longer)

Negative lead (shorter)

Insert the LED into the PCB as illustrated. Be sure to match up the positive lead of the LED (the longer one) with the positive pad on the PCB (marked with a "+").

Bend one of the leads down tightly. This serves as a securement so the part doesn't fall away while you solder.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.