Ga door naar hoofdinhoud
Help
Bewerken van stap 7 —

Stap type:

Sleep om te herschikken

With the wires placed in the correct position, the speaker and speaker cable wires are ready to be soldered.

Starting with one terminal, place the "tinned" soldering iron on both the terminal and the wire for 1-2 seconds. Then immediately place the soldering wire down on the terminal and speaker cable wire.

When placing the soldering wire on the terminal and speaker cable wire, make sure not to touch the soldering wire to the soldering iron tip.

Repeat this process for each terminal on each speaker.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.