Ga door naar hoofdinhoud
Help
Bewerken van stap 12 —

Stap type:

Sleep om te herschikken

Unscrew the color wheel cover. There are three screws holding it in place. One to the rear of the set, and two in front. The one to the rear is tucked way in, so I just unscrewed them and carefully left them in place and pulled them out with the cover. Slide the cover straight up, exposing the color wheel. As you do, note where the color wheel wires go — out the gap in the front.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.