Ga door naar hoofdinhoud
Help
Bewerken van stap 9 —

Stap type:

Sleep om te herschikken

Slide out the center unit slowly, just a few inches and take a peek inside as you do. It’s a snug fit, so you’ll need to ease out both the top and bottom at the same time. Some things to notice as you do this. Look at how the projector lens is fitted inside a foam sheath. You’ll need to put that back later, so take a good look.

There are a few cables on the left side restricting it. You’ll need to unplug these:

blue/brown two-wire power cable. You’ll need to unplug this from the main set.

blue/white cable connecting to the left side. Squeeze the plug to unlatch it and remove it from the center unit that you’re removing.

Sensor switch on the right side. Unscrew this from the tv case bracket.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.