Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Help
Bewerken van stap 10 —

Stap type:

Sleep om te herschikken

On the replacement cord, remove the white, green, and black protective caps. By hand, affix one connector to each cord wire. Follows these steps for each wire:

Twist the copper strands on the wire so you can cleanly insert the wire into the connector.

Push the copper wiring into the connector until the insulation prevents further insertion.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.