Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Help
Bewerken van stap 16 —

Stap type:

Sleep om te herschikken

Align the holes on the two halves of the baseplate precisely.

Using a #1 Phillips head screwdriver, tighten the three 3/8" Philips head screws in the holes located along the outer edge of the base plate.

Using a #1 TRIANGULAR head screwdriver, tighten the 3/8" TRIANGULAR Phillips screw at the center of the base plate

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.