Ga door naar hoofdinhoud
Help
Bewerken van stap 2 —

Stap type:

Sleep om te herschikken

Pull out the 5 white pinhead connectors using an IC (Integrated Circuit) extractor. Pinch the IC extractor just under the top lip of the wire housing.

There are two 10 pin connectors, one 8 pin connector, one 7 pin connector, and one 2 pin connector.

When reassembling, there is only one way to reinsert the pinhead connectors. Make sure the orientation matches that of the receiving connector on the motherboard.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.