Ga door naar hoofdinhoud
Help
Bewerken van stap 4 —

Stap type:

Sleep om te herschikken

Use the following steps to install the old trackpad into your new upper case.

Reinstall the T6 Torx set screw until it is flush with the aluminum bracket surrounding the trackpad.

Place the trackpad back into its void in the upper case, being sure the lower tabs are inserted underneath the keyboard side of the upper case.

Be sure the trackpad ribbon cable is not pinched between the trackpad and the upper case.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.