Ga door naar hoofdinhoud
Bewerken van stap 8 —

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 4 handleidingen die deze stap bevatten.

Stap type:

Sleep om te herschikken

Carefully wedge a plastic card under the battery on the side nearest the logic board.

Do not pry against the logic board or you may damage the phone.

Avoid prying near the top edge of the battery, or you may damage the upper component ribbon cable.

Slide the card from the top of the battery to the bottom, pushing toward the edge of the case.

If you still trouble, apply some isopropyl alcohol (90% or greater) under the battery and let it flow around the adhesive to help weaken it. High concentration isopropyl alcohol acts as a solvent and dries without leaving any residue, so it will not hurt your iPhone.

If necessary, repeat the same procedure with the case side of the battery.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.