Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

Help
Bewerken van stap 1 —

Stap type:

Sleep om te herschikken

Place a spool on the pin. Pull the thread from the spool straight out, following the length of the machine.

Hook the thread under the eyelet on the outer edge of the machine.

With one hand, hold the spool steady. Using the eyelet as a pivot, pull the string perpendicular with the other hand. Lay the thread into the slot, which bisects the top of the machine.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.