Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

Help
Bewerken van stap 2 —

Stap type:

Sleep om te herschikken

Remove the battery plug from the circuit board by pulling out the plugs to fully remove back panel.

Remove the speaker plugs from the circuit board by pulling out the plugs. They are located on opposite sides of the circuit board.

NOTE: When reassembling, note that the speaker with the red wire goes to the red plug, and the speaker with the white wire goes to the adjacent white plug.

Remove the light plug from the circuit board.

NOTE: This plug is twice as wide as the speaker and battery plugs.

Reassemble the device.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.