Pentax LX Mirror Box Mechanism Disassembly

Terug naar de handleiding

Engels

Nederlands

Vorige stap Volgende stap

Stap 14 vertalen

Stap 14

Pentax LX Mirror Box Mechanism Disassembly, Remove mirror return stop: stap 0, afbeelding 1 van 1

Remove mirror return stop

Remove two 2.4 mm #00 screws.
On some LX models, the mirror return stop will also have a rubber damper here.
Dampers of various thickness are provided in the model file. The stop plate position can be adjusted to fine tune the clearances in the mirror mechanism once it is fully assembled.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.