Ga door naar hoofdinhoud
Help
Bewerken van stap 9 —

Stap type:

Sleep om te herschikken

Finally - a full look at the motherboard! Some connectors left, but we're getting there

To start, remove the 2 screws at the bottom of the motherboard holding it in

Remove the snap connector that connects to the motherboard by pulling straight up on the tab

On the far right of the motherboard, there is a right-facing connector that runs to the wireless card. Wiggle the connector out, to the right.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.