Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 9 handleidingen die deze stap bevatten.
Stap 2 vertalen
Stap 2
-
Remove the battery door.
-
Open the battery door to about a 35° angle.
-
Pull the battery door straight outwards.
-
Remove the following screws from the bottom of the camera:
-
One M1.7x6.0mm JIS #000 screw
-
Two M1.7x2.5mm JIS #000 screws
-
One M1.7x5.5mm JIS #000 screw
Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.