Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 11 handleidingen die deze stap bevatten.
Stap 3 vertalen
Stap 3
Remove USB/Ethernet board
-
Unscrew the 4mm M3 phillips screw holding the USB connector to the rear cover plate.
-
Unscrew the four 5mm M3 phillips screws holding the USB/Ethernet board to the bracket and remove the board from the printer.
Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.