Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

Help
Bewerken van stap 9 —

Stap type:

Sleep om te herschikken

This step is for anti-glare display machines only. Skip this step if you have a glossy display.

Disconnect the Bluetooth cable by pulling the male end straight away from its socket.

Use the flat end of a spudger to carefully pry the AirPort antenna off its socket on the AirPort card.

Pull the connector parallel to the face of the logic board, not straight up.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.