Repareer je spullen Gemeenschap Winkel

Goodman Furnace Blower Motor Replacement

Terug naar de handleiding
Engels
Nederlands
Stap 5
Goodman Furnace Blower Motor Replacement, Removing the Motor from the Housing: stap 0, afbeelding 1 van 3 Goodman Furnace Blower Motor Replacement, Removing the Motor from the Housing: stap 0, afbeelding 2 van 3 Goodman Furnace Blower Motor Replacement, Removing the Motor from the Housing: stap 0, afbeelding 3 van 3
Removing the Motor from the Housing

  • Turn the motor container on its side, with the wires pointing up.

  • Unscrew the 3 screws attaching the motor to the housing.

  • Take the yellow wire out of the screw.

  • Use a wrench to remove the bolt from the shaft of the motor, located on the opposite side.

  • If rust has accumulated on the motor shaft, you may wish to use sandpaper to remove it to make the motor easier to remove.

  • Firmly grasp the motor from the side where the screws were previously located and pull to remove it.

  • The white label on the side of the motor contains the model number of the blower motor which you may use as a reference when ordering a replacement, if necessary.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.