Ga door naar hoofdinhoud
Help
Bewerken van stap 14 —

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 5 handleidingen die deze stap bevatten.

Stap type:

Sleep om te herschikken

Lift the side of the logic board opposite the ports out of the upper case.

Rotate the logic board away from the upper case until the ports clear the lip molded in the upper case.

Pull the logic board and MagSafe board away from the edge of the upper case as one piece.

The MagSafe board may get accidentally disconnected during this process. As a precaution, be sure the MagSafe board connector is securely seated in its socket before lowering the logic board back into the upper case.

Before lowering the logic board back into the upper case, be sure the left speaker and microphone cables are seated in their channels cut into the upper case (as seen in the third picture).

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.