Ga door naar hoofdinhoud
Help
Bewerken van stap 16 —

Stap type:

Sleep om te herschikken

Examine the door to see where you can reinforce it without interfering with the cam or making the door thicker. Glue the plastic tab back in place, using a piece of flat toothpick or scrap of plastic to reinforce it. Use super glue or epoxy. Do not use heat to set the epoxy - this plastic softens very easily.

In the picture, you can see the broken tab, and the bit of toothpick next to it.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.