Ga door naar hoofdinhoud
Help
Bewerken van stap 2 —

Waarschuwing: Je bewerkt nu een vooraf vereiste handleiding van de handleiding die je net bekeek. Alle wijzigingen die je hierin maakt, beïnvloeden alle 15 handleidingen die deze stap bevatten.

Stap type:

Sleep om te herschikken

Carefully lay the iMac stand-side down on a flat surface.

Due to tight tolerances, you will have to use a thin hooked tool to lift the display out of the outer case. As seen in the third picture, we made one out of a bent paperclip.

Use a thin hooked tool to lift one side of the top edge of the display by its steel outer frame.

After lifting the top edge of the display on one side, hold it out of the outer case while you use a hooked tool to lift the other side. A pencil or pen can be placed under the top edge of the display, parallel to the top edge and extending past the edge of the computer, to keep the first side propped up while lifting the second.

Do not lift the top edge of the display out of the outer case too far, as several short ribbon cables still connect the two components.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.