Ga door naar hoofdinhoud
Help
Bewerken van stap 2 —

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 43 handleidingen die deze stap bevatten.

Stap type:

Sleep om te herschikken

Gently lift the glass panel perpendicular to the face of the LCD enough to clear the steel mounting pins attached along the underside of the top edge of the glass panel.

Pull the glass panel away from the lower edge of the iMac and carefully set it aside.

Don't use the suction cups to carry the glass panel—if either one loses its grip, the panel could fall and break.

After setting the glass panel down safely, be sure to release the suction cups, as the suction force over time can crack the glass.

During reinstallation, be sure to meticulously clean the inside of the glass panel and the face of the LCD as any dust or fingerprints trapped inside will be annoyingly visible when the machine is turned on.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.