Ga door naar hoofdinhoud
Help
Bewerken van stap 4 —

Stap type:

Sleep om te herschikken

Remove the following four screws securing the hard drive and IR sensor cable to the upper case:

Two 1.5 mm Phillips screws.

Two 4 mm Phillips screws.

Slide the hard drive and IR sensor bracket away from the edge of the upper case.

Carefully peel the hard drive and IR sensor cable from the upper case.

Remove the hard drive/IR sensor cable from the upper case and set it aside.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.