Repareer je spullen Gemeenschap Winkel

Nintendo Switch Vervanging van de hoofdtelefoonjack en gamekaartlezer

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 10 handleidingen die deze stap bevatten.

Terug naar de handleiding
Engels
Nederlands
Stap 3
Nintendo Switch Headphone Jack and Game Card Reader Replacement: stap 0, afbeelding 1 van 2 Nintendo Switch Headphone Jack and Game Card Reader Replacement: stap 0, afbeelding 2 van 2

  • Use the point of a spudger to pry the headphone jack and game card reader connector straight up to disconnect it from the motherboard.

  • To re-attach press connectors like this one, carefully align and press down on one side until it clicks into place, then repeat on the other side. Do not press down on the middle. If the connector is misaligned, the pins can bend and cause permanent damage.

  • If the touch screen doesn't work and/or game cards aren't detected after reassembly, you might have not fully reconnected this press connector. Carefully disconnect it and try again.

Gebruik de punt van je spudger om de aansluitingen van de hoofdtelefoonjack en de gamekaartlezer in een rechte beweging van het moederbord omhoog te duwen en los te koppelen.

[* black] Use the point of a spudger to pry the headphone jack and game card reader connector straight up to disconnect it from the motherboard.
+[* icon_reminder] To re-attach [guide|25629|press connectors|stepid=70308|new_window=true] like this one, carefully align and press down on one side until it clicks into place, then repeat on the other side. Do not press down on the middle. If the connector is misaligned, the pins can bend and cause permanent damage.
+[* icon_note] If the touch screen doesn't work and/or game cards aren't detected after reassembly, you might have not fully reconnected this press connector. Carefully disconnect it and try again.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.