Repareer je spullen Gemeenschap Winkel

Nintendo Switch Vervanging van de hoofdtelefoonjack en gamekaartlezer

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 10 handleidingen die deze stap bevatten.

Terug naar de handleiding
Engels
Nederlands
Stap 2
Nintendo Switch Headphone Jack and Game Card Reader Replacement: stap 0, afbeelding 1 van 2 Nintendo Switch Headphone Jack and Game Card Reader Replacement: stap 0, afbeelding 2 van 2

  • Use a pair of tweezers to slide the digitizer cable horizontally out of its connector on the game card reader board.

  • Before inserting the cable during reassembly, make sure the ZIF connector locking flap is flipped up.

  • With the cable parallel to the board, gently slide it into its connector.

  • Don't force the cable into the connector. If it doesn't insert, ensure the locking flap is flipped up, reposition the cable, and try again.

  • If your touchscreen doesn't work after the repair but your Game Card reader does, make sure this cable is properly inserted. If your Game Card reader also doesn't work, check the Game Card connector in the next step instead.

Gebruik een pincet om de aansluiting van de digitizer-kabel horizontaal uit het contact op het bord van de gamekaartlezer te schuiven.

-[* black] Use a pair of tweezers to slide the digitizer cable horizontally out of its connector on the game card reader board.
+[* black] Use a pair of [product|IF145-020|tweezers] to slide the digitizer cable horizontally out of its connector on the game card reader board.
+[* icon_reminder] Before inserting the cable during reassembly, make sure the ZIF connector locking flap is [link|https://guide-images.cdn.ifixit.com/igi/3m3hCiITLE1D5mZN.full|flipped up|new_window=true].
+[* icon_reminder] With the cable ***parallel to the board***, gently slide it into its connector.
+ [* icon_caution] Don't force the cable into the connector. If it doesn't insert, ensure the locking flap is flipped up, reposition the cable, and try again.
+[* icon_note] If your touchscreen doesn't work after the repair but your Game Card reader does, make sure this cable is properly inserted. If your Game Card reader also doesn't work, check the Game Card connector in the next step instead.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.