Help
Bewerken van stap 12 —

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden de handleiding die deze stap bevat.

Stap type:

Sleep om te herschikken

Clean up the glue that remains on the borders. A small microfiber with a bit of WD40 or windex can help you take all the glue off.

Be sure to not use too much WD40 or windex.

When cleaning out the glue, do NOT attempt to scrap glue out of the cracks between the LCD and the frame. A very small amount of force toward the center or from underneath will crack the LED.

Cut up two small 1mm pieces of the sticker tape and glue the buttons to the phone to keep them in place.

It's very important to make sure the buttons line up exactly with the picture.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.