Ga door naar hoofdinhoud
Bewerken van stap 1 —

Stap type:

Sleep om te herschikken

To remove the faulty AUX port wires, de-solder the two wires on the white rectangular region of the board.

If you don't know how to solder, check out How To Solder and Desolder Connections.

Soldering irons are extremely hot and can burn you if you touch them!

If you hold the soldering iron tip at the same spot for too long, it can strip the metal from the plastic board. You may not be able to solder wire to that point again.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.