Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 26 handleidingen die deze stap bevatten.
Stap 4 vertalen
Stap 4
-
Insert the flat end of a spudger between the front and rear shells near the bottom of the left edge.
-
Slide the spudger along the left edge and gently pry the shells apart to release the clips.
| - | [title] Release the rear case clips |
|---|---|
| - | [* icon_note] Tight plastic clips secure the left and right edges of the rear case. |
| + | [* icon_note] Tight plastic clips secure the [link|https://guide-images.cdn.ifixit.com/igi/cSFE5AIPQAOqYn5A.full|left|new_window=true] and [link|https://guide-images.cdn.ifixit.com/igi/gssrnZ6hIcnAIKxY.full|right|new_window=true] edges of the rear case. |
| [* black] Insert the flat end of a spudger between the front and rear shells near the bottom of the left edge. | |
| - | [* black] Slide the spudger along the left edge and gently pry the shells apart to |
| + | [* black] Slide the spudger along the left edge and gently pry the shells apart to release the clips. |
Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.