Stap 2 vertalen
Stap 2
Lift the battery from its adhesive
-
Apply a suction handle to the center of the battery.
-
Brace the top and bottom of the device against your work surface with one hand and firmly pull up on the suction handle with the other.
-
The adhesive takes time and repeated pulls rather than strong force to loosen. Pull on the suction cup with steady force for 15 seconds at a time.
-
If the battery doesn't loosen, apply 1-2 drops of isopropyl alcohol along the top, left, and right edges, wait a minute, and pull again.
-
When the battery begins to lift from the device, proceed to the next step.
Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.