Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

Help
Bewerken van stap 4 —

Stap type:

Sleep om te herschikken

We can confirm now that CPU has pseudo soldered or damaged. Let’s re-solder CPU and see how it works.

Remove the shield plate with Hot Air Gun. Stick High-temperature Tape on components around CPU. Then detach CPU from the board with Hot Air Gun. Clean the bonding pad and remove solder on CPU afterwards.

Get CPU reballed. Once done, wait for the CPU to cool for 2 minutes. Apply some BGA Paste Flux to the bonding pad. Get the reballing finished CPU in position and solder with Hot Air Gun.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.