Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie


Bewerken van stap 13 —

Stap type:

Sleep om te herschikken

Turn the PCB over and pinch the latches on the plastic stays with a pair of needle-nose pliers so that the stays fall out. They should pop out from the force of the springs on the other side. If they do not pop out, give them a gentle push from this side of the PCB.

Make sure not to lose the springs. You can throw away the plastic stays.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.