Ga door naar hoofdinhoud

PSP 300x WI-FI Antenna Replacement/Removal

Engels
Nederlands
Stap 2
PSP 300x  WI-FI Antenna Replacement/Removal, Casing: stap 0, afbeelding 1 van 3 PSP 300x  WI-FI Antenna Replacement/Removal, Casing: stap 0, afbeelding 2 van 3 PSP 300x  WI-FI Antenna Replacement/Removal, Casing: stap 0, afbeelding 3 van 3
Casing
  • Peel back the warranty sticker that is behind the battery with a spudger or your fingernail.

  • Unscrew all four screws from the back of the PSP with the Phillips #00 Screwdriver.

  • Two are located behind the battery's warranty sticker.

  • Two are located on the right side of the PSP.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.