Skip to main content
Help
Bewerken van stap 8 —

Stap type:

Sleep om te herschikken

Now that the side panels are removed, we can begin removing the camera's front bezel.

First, remove the two small Phillips screws on the lens side of the camera. These are identical to the screws we removed earlier

Using a spudger or small flat-blade screwdriver, gently lift the metal tab on the other side of the camera so that it clears the nub on the chassis.

Push the front bezel forward just enough so that the tab does not snap back into place.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.