Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

Help
Bewerken van stap 3 —

Stap type:

Sleep om te herschikken

The plastic rear cover of the Huawei Watch GT is secured by 4 Torx T3 screws (3.6 mm length).

Applying an opening pick or fingernail to the small notch at the upper edge of the watch is enough to separate the bottom cover.

At this point it's possible to open the watch but the display and back cover are still connected by a multi purpose interconnect flex cable.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.