Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Help
Bewerken van stap 8 —

Stap type:

Sleep om te herschikken

The adhesive that holds down the logic board is very strong. To remove the board, you must first weaken the adhesive using either a solvent, or heat.

Many glue solvents (such as isopropyl alcohol) are flammable, so don't mix these methods.

Apply some solvent in a seamless movement along both edges of the logic board. Allow it to penetrate the adhesive for several minutes.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.