Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Help
Bewerken van stap 1 —

Stap type:

Sleep om te herschikken

Before installing new adhesive, thoroughly clean the display assembly and the frame of all residue.

Use tweezers to pull up sections of tape residue.

Use an opening tool or a spudger to scrape residue off. You can use high concentration (over 90%) isopropyl alcohol to soften the adhesive.

Remove the residue by wiping in one direction to prevent smearing.

Do not scrape with a metal tool, or you will scratch the display assembly's surface.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.