Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie


Bewerken van stap 1 —

Stap type:

Sleep om te herschikken

Remember that the device is still upside down, so the left control button will be on your right hand side. Then rotate the device 180 degrees. You should see the device as it looks in the picture.

Carefully lift the iHome about an inch from your surface to verify you are going to the correct spot, because the iHome looks symmetrical at this point.

Carefully lift the main motherboard out of the way of the button control circuit board.

Remove the following screws:

Four 6 mm Phillips #2

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.