Ga door naar hoofdinhoud

iMac G5 20" Model A1145 Logic board Replacement

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 6 handleidingen die deze stap bevatten.

Engels
Nederlands
Stap 5
iMac G5 20" Model A1145 Logic board Replacement: stap 0, afbeelding 1 van 2 iMac G5 20" Model A1145 Logic board Replacement: stap 0, afbeelding 2 van 2
  • Remove the single T10 Torx screw securing the right speaker to the rear case.

  • The right speaker screw has fine threads.

  • Lift the right speaker out of the rear case, minding the short cable between the speaker and its connector (located slightly above the right speaker).

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.