Bewerken van stap 1 —

Stap type:

Sleep om te herschikken

Remove the following screws using a Phillips #0 screwdriver to free the motherboard from the rest of the internal components.

A Magnetic Project Mat is recommended to keep track of screws and removed parts.

Twelve 5.5 mm Phillips #0 main frame screws.

Six 3.5 mm Phillips #0 fan screws.

Four 3.5 mm Phillips #0 internal compartment screws.

Eight 3.5 mm Phillips #0 Hard Drive screws.

Four 3.5 mm Phillips #0 CD Drive screws.

After removing the screws NOT marked in red, each corresponding component can be removed, but it is not recommended for this guide.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.