Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 6 handleidingen die deze stap bevatten.
Stap 25 vertalen
Stap 25
-
Continue rotating the board toward yourself until you have enough room to reach the SATA connector (shown in red).
-
Insert the blunt end of a metal spudger between the SATA connector and its socket. Twist the shaft of the metal spudger to separate the connector from its socket.
-
Disconnect the SATA cable from the logic board.
-
Lift the logic board out of the rear case by its edges, minding any cables that may get caught.
Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.