Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Help
Bewerken van stap 2 —

Stap type:

Sleep om te herschikken

Insert an opening pick under the lower side of the back panel (opposite the R and ZR buttons).

Slide the flat edge of an opening pick up the side of the Joy-Con.

Be careful not to slide the opening pick too far inside the Joy-Con. This may damage the inner components. The back panel has shallow interference-fit tabs on the side opposite the charging rail. These loosen fairly easily, so not much pressure is needed.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.