Ga door naar hoofdinhoud

Fix Your Stuff

Right to Repair

Parts & Tools

Help
Bewerken van stap 8 —

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 3 handleidingen die deze stap bevatten.

Stap type:

Sleep om te herschikken

After a couple minutes, insert one corner of a plastic card underneath the battery, starting from the lower edge of the bottom, right-most cell.

This shouldn't require much force. If you have trouble, apply more adhesive remover and give it 2-3 additional minutes to penetrate.

Try not to deform the battery. A damaged or punctured battery can leak dangerous chemicals and/or catch fire.

Wiggle the card from side to side and slide it all the way underneath both battery cells.

Lift the cells to fully separate the adhesive, but don't try to remove them from your MacBook yet.

Leave the plastic card temporarily underneath the cells to prevent the adhesive from re-bonding as you proceed to the next step.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.