Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Help
Bewerken van stap 4 —

Stap type:

Sleep om te herschikken

While holding the nuts on the bottom side of the skateboard in place with the 3/8" wrench, tighten the screws from the top side of the skateboard with a screwdriver. Tighten the screws in a diagonal pattern until the head of the screw sinks slightly into the grip tape.

Repeat steps 1 - 6 to install the second truck.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.