Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Help
Bewerken van stap 2 —

Stap type:

Sleep om te herschikken

Remove eight 10.5 mm Phillips #1 screws from the cover.

Insert a metal spurger at the corner to help loosen the cover.

There is still glue sticking the front cover and the back cover together.

Starting with corners, lift up the cover slowly and carefully.

Do not pull too hard when removing the cover. There are wires connecting between the battery and the circuit board.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.