Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie


Bewerken van stap 9 —

Stap type:

Sleep om te herschikken

When the printer is running, you should check that you've mounted and plugged the new CPU fan correctly. You can see it rotating with a small mirror or you can carefully feel it with your finger, like in the photo.

Tie up the nearby cables, so they can't move and block the fan.

Warning! The power inlet and wires are right above the mainboard, be careful or you may get an electric shock!

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.