Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie


Bewerken van stap 10 —

Stap type:

Sleep om te herschikken

You need to change some settings in the BIOS, otherwise the printer firmware will always freeze as soon as you plug in the Ethernet cable. Specifically, you need to disable some onboard devices to prevent IRQ conflicts (the firmware runs on FreeDOS, which is not Plug and Play OS).

Unfortunately, I don't remember which settings exactly have to be changed, but I made photos on a working printer, so you can use them as a guide.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.