Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

Help
Bewerken van stap 3 —

Stap type:

Sleep om te herschikken

Use the flat end of a spudger to pry the thermal sensor board off the adhesive securing it to the hard drive.

If you're replacing your hard drive, transfer this sensor to the same position on the new drive.

Users have reported that without the sensor connected, the fans will run consistently at maximum speed.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.