Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

Bewerken van stap 2 —

Stap type:

Sleep om te herschikken

While high hours are not an indication of failure, these drives are more likely to fail.

GSmartControl can be used in Ubuntu if you cannot read the output from Disks.

Boot your system into a live Ubuntu session. Locate the Disks application and select the hard disk you want to test.

From the drop-down menu, select SMART Data and Self Tests. This will pull up the SMART data.

Locate the following SMART attributes: Power On Hours and Power Cycle Count.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.