Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

Help
Bewerken van stap 18 —

Stap type:

Sleep om te herschikken

Now the motor plate can be added to the end of the pistol grip.

Avoid pinching wires.

With the plate pressed in place take the motor plate screws (which are 2mm hex with cone style head) and screw the plate down.

It is not a bad idea to screw both screw a little loose at first and then finish tightening them after both are in place.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.