Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie


Bewerken van stap 5 —

Stap type:

Sleep om te herschikken

Take out the center screw, near the blower fan, and the screw in the small SD card reader assembly. Then using tweezers or a spudger, carefully remove the SD card reader and detach the flex cable from the board; you can do this by carefully sliding a spudger under the area covered by the foam and gently prying up. it comes off fairly easily.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.